Hey guys,

Quick update before the glass arives. The cage is finished now, I'm just adding the final furnishings. This is a picture of the vivarium in place and ready to go.

 

While the cage is being set up and prepared the degus are living in a make-shift pen in my room.

Im still looking for some decent branches and logs to put into the cage, im attaching some small shelves and ledges at the moment. When you build your vivariums, try not to throw anything away! You can make some cool extra ledges and things from offcuts and spares. Below is a picture of what I made out of my offcuts:

Offcuts

 

 What you can Build!

To join these together, I used Gripfill. I don't usually agree with using glues and pastes to fix things together in a degu cage as they do like to chew and I'm worried they will ingest the glue. However, in this case I ran out of budget. I have glued them in a way so the joins are not easily chewed, I will also be monitoring thier chewing; if I see them taking a special interest they will be immediately removed.

Thanks for reading everyone! And to finish a quick picture of the new baby, hes about 7 weeks at the moment.

Smithomatic :)

Degus getting ready for bed

Hello,

I just wanted to share this video with all of you, its a video of my degus getting ready for bed time after a play. I have had it sat in my computer for ages and never released it. The cage in this video is the one they used to live in, back when I made this post. The video also gives a bit of an idea of my old cage set up.

Degus featured are Chewy and Scut

Enoy! :)

Glass has been orderd!

Hey everyone,

The glass has now been orderd should be here in the next 3-4 days. I have also managed to give the garage a huge clean out, so I will be able to get some better snaps of the set up. Also I am hopeing there will be enough space on the floor in front of the cage to create a run for them.

The glass is more much more expensive than PVC windows, I will display in a future post why PVC may be unsuitable for many cages. My current degu cage uses PVC, I bought one large sheet from Wickes and cut it to size my self. You can see the PVC I used here http://www.wickes.co.uk/acrylic-sheet/invt/210002/. Unfortunately I could not find a link to the same material in BNQ however I do know that they sell it and that it is cheaper there.

I ordered my glass from Roman Glass (http://www.romanglass.co.uk/), they have a fair few outlets across the UK. When you order the glass, be sure to ask for it Edged and Toughened, this will strengthen the glass so that if it does break it will be in large peices (not the dangerous spikes and dust that some glass smashes into). Having it "edged" will also help it to slide in its runner. The total cost for my 4 peices of glass was £120.00 inc. VAT.

Roof Tiles

Hey everyone,

Quick update, I just wanted to share these with you while they are fresh in my mind. You can get them from building industrial estates, offer to buy the spares off people who have just had extensions to thier homes or Ebay. Obviously they will need a tidy up depending on thier condition. Stay tuned to the blog, I myself have some of these roof tiles and will post them here when I get my cam fixed.

They make excellent tunnels and hiding holes for Degus, I love the lip at the front of the tile. Reminds me of a little hobbit home or something. They are great for burying under bedding for the degu to find aswell!  They still look very natural above bedding too, I cant wait to share my pics of the ones in my cage.

Degu Cage Progress

Please find below a video of my degu cage progress so far. The cage is structurally ready, just need to add the furnishings, metal work and glass. Very near the end now!

Please also note that it does not take as long to make a degu cage as I have been taking. I have been purposefully only doing small bits at a time as my degus live in the garage and the garage is also my only place to perform wood work. I do not wish to disturb them too much or fill the room with saw dust.

Many thanks all,

Smithomatic

Degu cage - Shelves

Hey everyone,

Just wanted to show everyone that I have built and installed the shelves (or levels) of the degu cage. Below are some pictures of the steps I used.

As you can see below, I have the shelf already cut (I had this done previously when I had all my peices cut) and I have trimmed off the 4 corners so it fits inside the cage around the (inner) frame.

I have used a jigsaw to cut 2 holes into the shelf at the back, this way the degus can get from level to level.

In the middle I have bolted 2 strips of pine down. My "divider panel" will slide in between these 2 strips, this gives the degus an equal share of the cage without being able to get to each other.

In the picture below my "divider panel" has a large rectangular hole in the middle. This will be covered in mesh so the degus can see each other but not attack each other.
 

I then attach two long panels of pine wood onto the front of the shelf. This will keep the bedding in. I bolted two strips of pine wood frame to the front and then bolted my two pine wood panels to them.

This is what the finished product looks like:

I then had a friend hold the shelf in place while i drilled the holes through the side and into the frame underneath the shelf. We then bolted everything together.

Below are some pictures of the shelves inside the cage.

Many thanks everyone, keep an eye, more updates to come!

Smithomatic

Degu Home - Top Tier

Hey all,

I wanted to post some pictures of the Degu cage. Progress has been slow trying to fit the build in around work.

I have added the back panel of the cage, this panel is made of 2 smaller panels as BnQ were not able to provide a sheet of MDF big enough!

As you can also see, I had to take the picture from just outside the door, the garage is very small with all the DIY kit out. Not only this but the cage almost touches the ceiling.

I have also finished creating the top tier.

I have left a small gap in the frame to allow for the runners to fit inside. I got the idea for this top tier here (this is a very informative degu website by Nightwishraven999). I decided however that I could use the entire space by making a shelf here, thus giving the degus more room to explore. Half of this top tier will be behind glass (I need to add a hole to this top shelf so the degus can get up) and the other half will be a balcony for them to come out and visit us on!


Below are some pictures of longtail (one of my degus) exploring the top tier and checking that everything is in order. He seems to be quite pleased with the results.

Many thanks everyone, stay tuned!


Smithomatic

Back Panel

Hey all,

Back panel has been attached, pictures soon. Do stay tuned!

I will also be releasing a complete list of materials and tools required, aswell as where you can get them and at what cost.

Many thanks,


Smithomatic

Hey guys, I just wanted to clarify one of the pictures in my designs.

As some of you may have noticed one of the pictures in my designs is half blue and half purple. This is because my 3 degu boys do not get along. The purple area is the space I have designated to one of the degus and the blue area is the space I have designated for the other two degus. They will all be living in the same cage.                     

Build progress so far

Hey everyone, heres another update for you.

So I have started to build the cage and below is the progress so far...

So in this first picture you can see the base of the cage and some pine strips that I am using to construct the frame. The front back and side panels are going to sit on top of the base, because of this the frame needs to be 18mm inside the base (18mm is the thickness of the MDF sheets). It is also not important if the frame stretches all the way around, it will work as long as the pine strips hold the panels to the base.

 

I am using 55mm bolts to attach everything in the cage together. Bolts are good because it means that each panel is easily removed in the future and replaced if required. Bolts, unlike screws, will not move around in the hole you drill if the structure wobbles (this will make the holes bigger and the structure will become more and more wobbly!). Bolts go straight through and keep everything really tight.

Below you can see how the front panel has been attached, a steel "double u" glass runner will sit exactly on top of this panel at a later date.

I use about 3 bolts to secure a panel, depending on whether or not it still feels a bit wobbly. If it still does not feel secure I use 3 - 5 bolts, you shoudnt need more than this. (unless you are building a HUGE cage!)

There will be 4 strips of pine wood in each corner to secure all the panels to each other. As you can see below I have 1 strip attaching the side panel to the front panel, and another strip ready to secure the side panel to the back panel. The side panel also has 2 bolts securing it to the base.

I have also secured another front panel that will frame the glass sliding doors. I used another long pine strip and 3 bolts to secure this smaller panel.

More build updates to come (hopefully) this monday, so stay tuned!

Many thanks guys! :)